ansys 加载时出现提示信息,我在加载节点面荷载时,“Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly appl

来源：学生作业帮助网 编辑：作业帮 时间：2024/04/28 05:16:17
ansys 加载时出现提示信息,我在加载节点面荷载时,“Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly appl

ansys 加载时出现提示信息,我在加载节点面荷载时,“Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly appl
ansys 加载时出现提示信息,
我在加载节点面荷载时,
“Both solid model and finite element model boundary conditions have been
applied to this model.As solid loads are transferred to the nodes or
elements,they can overwrite directly applied loads.”
我加载的命令流是：
LOCAL,11,1,0,1.55,0,,,,1,1,
csys,11
allsel
cmsel,s,jg
ESLV,S
NSLe,S
NSEL,s,LOC,Z,18.5-h,H1-h
NSEL,r,LOC,y,180,360
NSEL,R,LOC,x,1.54,1.56
CM,JXM-1,NODE
sfgrad,pres,0,z,18.5-h,-gm
sf,all,pres,gm*(h1-18.5)
前面已经定义了H与H1.

ansys 加载时出现提示信息,我在加载节点面荷载时,“Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly appl
没有关系的,因为ansys提供单元载荷和实体载荷,存在一个转换,也就是提示你有转换了,一般不会影响预期的结果

ANSYS加载问题我在用ansys加载时.出现了问题:Input/Output error on unit = 9.Possible full disk.这是什么问题?我该怎么办? ansys 加载时出现提示信息,我在加载节点面荷载时,“Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly appl ANSYS在加载时出现SFE is not a recognized BEGIN command,abbreviation,or a macro. ANSYS在加载时出现SFE is not a recognized BEGIN command,abbreviation,or a macro. 在ansys workbench中如何加载摩擦力? 在ansys中加速度载荷如何加载 ansys如何加载扭矩 在ANSYS/LS-DYNA中,如何加载距离-受力载荷曲线,我只能加载时间-受力曲线. 请问ansys出现下列问题是什么意思,要怎么解决?我的加载命令流： 怎样在ANSYS中加载圆周力我用的是ANSYS 10.0,想在一条轴上加载一扭矩,在轴边缘加载一个圆周切向力,有哪位高手知道怎么弄啊?谢谢了~~~~ ANSYS 如何加载正弦交流电 在ansys中热分析时怎样加载随时间 变化的温度场 在ansys中如何加载一个周期性变化的力 ansys workbench怎么在模型上加载角速度? hypermesh前处理ANSYS分析出现的加载问题HYPERMESH导入ANSYS进行分析时我对hypermesh的实体模型进行加载,并使用BCs--->Loads on geometry--->map loads将其施加于所画好的实体单元之上但是导入ANSYS之后出现 abaqus,我用位移控制的方式加载 ,加载完成后,在显示变形图时,为什么没有变形呢? ansys在耦合点加载出的错,帮我解决了,给您50分财富, 在ANSYS建模时的单位用什么,米还是微米?加载的热流密度单位又是什么?