请高手帮忙翻译以下英文.八百里加急!谢谢!When set to logic high, both amplifiers are muted and in low power (idle) mode.When set to logic high, device goes into low power mode. If not used this pin should be grounded. Regulated +5V s

来源:学生作业帮助网 编辑:作业帮 时间:2024/05/09 14:56:23
请高手帮忙翻译以下英文.八百里加急!谢谢!When set to logic high, both amplifiers are muted and in low power (idle) mode.When set to logic high, device goes into low power mode.  If not used this pin should be grounded. Regulated +5V s

请高手帮忙翻译以下英文.八百里加急!谢谢!When set to logic high, both amplifiers are muted and in low power (idle) mode.When set to logic high, device goes into low power mode. If not used this pin should be grounded. Regulated +5V s
请高手帮忙翻译以下英文.八百里加急!
谢谢!
When set to logic high, both amplifiers are muted and in low power (idle) mode.
When set to logic high, device goes into low power mode. If not used this pin
should be grounded.
Regulated +5V source used to supply power to pins 2 & 8.

请高手帮忙翻译以下英文.八百里加急!谢谢!When set to logic high, both amplifiers are muted and in low power (idle) mode.When set to logic high, device goes into low power mode. If not used this pin should be grounded. Regulated +5V s
当设置到高电平逻辑(电路)时,两个扩音器都无声,处于低耗能(闲置)状态;
当设置到高电平逻辑(电路)时,如果不使用此引线(销)接地,那么装置会处于低耗能状态.
需要再提高5伏电源电压来为2号和8号引线(销)提供动力.

当设置成逻辑高电平时,两个扬声器都消声并处于低耗能(空闲)模式.
当设置成逻辑高电平时,装置进入低耗能模式.如果不使用,这个管脚应该接地.
标准的+5电压源用于向2&8管脚提供电量
我就是学这方面的,比较了解