英语翻译请高手帮忙翻译下面的内容,不要软件翻译的啊!【摘要:无线型来电提示和显示装置由电话信息发送部分与无线信号接受和号码显示部分组成.电话信号发送端是将电话线与双音频解
来源:学生作业帮助网 编辑:作业帮 时间:2024/05/12 08:26:55
英语翻译请高手帮忙翻译下面的内容,不要软件翻译的啊!【摘要:无线型来电提示和显示装置由电话信息发送部分与无线信号接受和号码显示部分组成.电话信号发送端是将电话线与双音频解
英语翻译
请高手帮忙翻译下面的内容,不要软件翻译的啊!
【
摘要:
无线型来电提示和显示装置由电话信息发送部分与无线信号接受和号码显示部分组成.
电话信号发送端是将电话线与双音频解码芯片CM8870的输入端连接,将DTMF信号形式转化为可分析利用的数字信号形式,再经单片机AT89S51对信号进行控制处理,由串行输出端将串行信号传与无线发射模块ZH-F100发送出去.
无线信号接收端将信号接收并送与单片机串行输入口,单片机按程序流程进行分析、处理,并控制发光二极管提示灯再接收到指令后发光,液晶显示屏RT1602C依次显示来电号码.
该装置可完成远距离(>10m)来电提示和号码显示功能,具有一定实用性和可操作性.
】
英语翻译请高手帮忙翻译下面的内容,不要软件翻译的啊!【摘要:无线型来电提示和显示装置由电话信息发送部分与无线信号接受和号码显示部分组成.电话信号发送端是将电话线与双音频解
Not linear comes the electricity prompt and the display unit accepts by the telephone message routing part and the wireless signal with the number demonstrated that the part composes. the telephone signal transmitting end is the telephone line with the double audio frequency decoding chip CM8870 input end connection, transforms the DTMF signal form for may analyze the use the digital signal form, passes through monolithic integrated circuit AT89S51 to carry on control processing again to the signal, passes on by the serial out-port the serial signal with wireless launch module ZH-F100 transmits. the wireless signal receiving end and delivers with the monolithic integrated circuit serial input port the signal receive, the monolithic integrated circuit carries on according to the procedure flow the analysis, processing, after and controls the light emitter diode prompt lamp receives the instruction again shines, liquid crystal display monitor RT1602C demonstrates the electricity number in turn. this equipment may complete the long-distance range (>10m) to come the electricity prompt and the number demonstration function, has certain usability and the feasibility
Abstract:
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end wi...
全部展开
Abstract:
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end with two-line audio decoder chip CM8870 input to connect to DTMF signals into a form of analysis can be used in the form of digital signal via single-chip AT89S51 control of the signal processing by the serial output Serial-signal and wireless module launched ZH-F100 sent.
Wireless signal receiver to send and receive signals with single-chip serial input, single-chip process in accordance with the procedure for analysis, processing, control and LED lights prompt receipt of orders after luminous followed, in turn RT1602C LCD display Caller ID .
The device can complete the distance (> 10m) and prompted calls number display, a certain practicality and maneuverability.
我是英语外国教师,你放心吧!
收起
楼上的 没这样骗人的。。翻译的这么多错误
Abstract:
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end wi...
全部展开
Abstract:
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end with two-line audio decoder chip CM8870 input to connect to DTMF signals into a form of analysis can be used in the form of digital signal via single-chip AT89S51 control of the signal processing by the serial output Serial-signal and wireless module launched ZH-F100 sent.
Wireless signal receiver to send and receive signals with single-chip serial input, single-chip process in accordance with the procedure for analysis, processing, control and LED lights prompt receipt of orders after luminous followed, in turn RT1602C LCD display Caller ID .
The device can complete the distance (> 10m) and prompted calls number display, a certain practicality and maneuverability.
是这个了!
收起
Abstract:
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end ...
全部展开
Abstract:
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end with two-line audio decoder chip CM8870 input to connect to DTMF signals into a form of analysis can be used in the form of digital signal via single-chip AT89S51 control of the signal processing by the serial output Serial-signal and wireless module launched ZH-F100 sent.
Wireless signal receiver to send and receive signals with single-chip serial input, single-chip process in accordance with the procedure for analysis, processing, control and LED lights prompt receipt of orders after luminous followed, in turn RT1602C LCD display Caller ID .
The device can complete the distance (> 10m) and prompted calls number display, a certain practicality and maneuverability.
呵呵
收起
无线型来电提示和显示装置由电话信息发送部分与无线信号接受和号码显示部分组成。
电话信号发送端是将电话线与双音频解码芯片CM8870的输入端连接,将DTMF信号形式转化为可分析利用的数字信号形式,再经单片机AT89S51对信号进行控制处理,由串行输出端将串行信号传与无线发射模块ZH-F100发送出去。
无线信号接收端将信号接收并送与单片机串行输入口,单片机按程序流程进行分析、处理...
全部展开
无线型来电提示和显示装置由电话信息发送部分与无线信号接受和号码显示部分组成。
电话信号发送端是将电话线与双音频解码芯片CM8870的输入端连接,将DTMF信号形式转化为可分析利用的数字信号形式,再经单片机AT89S51对信号进行控制处理,由串行输出端将串行信号传与无线发射模块ZH-F100发送出去。
无线信号接收端将信号接收并送与单片机串行输入口,单片机按程序流程进行分析、处理,并控制发光二极管提示灯再接收到指令后发光,液晶显示屏RT1602C依次显示来电号码。
该装置可完成远距离(>10m)来电提示和号码显示功能,具有一定实用性和可操作性。
】
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end with two-line audio decoder chip CM8870 input to connect to DTMF signals into a form of analysis can be used in the form of digital signal via single-chip AT89S51 control of the signal processing by the serial output Serial-signal and wireless module launched ZH-F100 sent.
Wireless signal receiver to send and receive signals with single-chip serial input, single-chip process in accordance with the procedure for analysis, processing, control and LED lights prompt receipt of orders after luminous followed, in turn RT1602C LCD display Caller ID .
The device can complete the distance (> 10m) and prompted calls number display, a certain practicality and maneuverability.
】
收起
Wireless signal receiver to send and receive signals with single-chip serial input, single-chip process in accordance with the procedure for analysis, processing, control and LED lights prompt receipt...
全部展开
Wireless signal receiver to send and receive signals with single-chip serial input, single-chip process in accordance with the procedure for analysis, processing, control and LED lights prompt receipt of orders after luminous followed, in turn RT1602C LCD display Caller ID .
The device can complete the distance (> 10m) and prompted calls number display, a certain practicality and maneuverability.
收起
楼上的看看都是错的,一大堆语法错误!!~~!!!
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end with two-line au...
全部展开
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end with two-line audio decoder chip CM8870 input to connect to DTMF signals into a form of analysis can be used in the form of digital signal via single-chip AT89S51 control of the signal processing by the serial output Serial-signal and wireless module launched ZH-F100 sent.
Wireless signal receiver to send and receive signals with single-chip serial input, single-chip process in accordance with the procedure for analysis, processing, control and LED lights prompt receipt of orders after luminous followed, in turn RT1602C LCD display Caller ID .
The device can complete the distance (> 10m) and prompted calls number display, a certain practicality and maneuverability.
】
收起
高手好多呃
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end with tw...
全部展开
高手好多呃
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end with two-line audio decoder chip CM8870 input to connect to DTMF signals into a form of analysis can be used in the form of digital signal via single-chip AT89S51 control of the signal processing by the serial output Serial-signal and wireless module launched ZH-F100 sent.
Wireless signal receiver to send and receive signals with single-chip serial input, single-chip process in accordance with the procedure for analysis, processing, control and LED lights prompt receipt of orders after luminous followed, in turn RT1602C LCD display Caller ID .
The device can complete the distance (> 10m) and prompted calls number display, a certain practicality and maneuverability.
收起
Abstract:
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end wi...
全部展开
Abstract:
Wireless-device and display prompted calls from the phone to send some of the information and to receive wireless signals and the numbers show parts.
Phone signal is sent to end with two-line audio decoder chip CM8870 input to connect to DTMF signals into a form of analysis can be used in the form of digital signal via single-chip AT89S51 control of the signal processing by the serial output Serial-signal and wireless module launched ZH-F100 sent.
Wireless signal receiver to send and receive signals with single-chip serial input, single-chip process in accordance with the procedure for analysis, processing, control and LED lights prompt receipt of orders after luminous followed, in turn RT1602C LCD display Caller ID .
The device can complete the distance (> 10m) and prompted calls number display, a certain practicality and maneuverability.
收起